Curriculum Vitae

Ir. Hendi Saryanto, M. Eng

Perumahan Wisma Harapan Blok B:8 No.38, Tangerang 15131
hsaryanto@yahoo.com
fathul-ilmi.blogspot.com

EDUCATIONAL BACKGROUND

2008-2011

Master of Mechanical Engineering by research at Faculty of Mechanical and Manufacturing Engineering Universiti Tun Hussein Onn Malaysia (Malaysia). Thesis: " High Temperature Oxidation Resistance of Nanocrystalline Fe₈₀Cr₂₀ Alloys And Ferritic Steel Implanted With Lanthanum and Titanium Dopants.

Advisor :

• Prof. Dr. Ing. Darwin Sebayang (Universiti Tun Hussein Onn Malaysia)
• Prof. Madya. Dr. Badrul bin Omar (Universiti Tun Hussein Onn Malaysia)
• Dr. Ing. Pudji Untoro (National Nuclear Energy Agency (BATAN) Indonesia)

2001-2007

Bachelor degree in Mechanical Engineering at Mercu Buana University (Jakarta- Indonesia)

1993-1996

Senior High School at STM Negeri 80 Tangerang (Banten-Indonesia)

1990-1993

Junior High School at SMP Negeri Koto Baru-Pesisir Selatan (Sumatra Barat-Indonesia)

1984-1990

Elementary school at SD Negeri Jati Uwung-Tangerang (Banten-Indonesia)

PROFESSIONAL EXPERIENCE

November 2011-September 2013

Working as Process Engineer at PT. Osram Indonesia

November, 2008 to October, 2011

Working as Researcheat Advance Materials and Manufacturing Center (AMMC)-UTHM Malaysia in cooperation with National Nuclear Energy Agency (BATAN) Indonesia

August, 2006 to October, 2008

Working as Mechanical Design Engineer at CV Duta Banten Pertiwi, Serang-Banten, Indonesia

1999 to 2002

Working as Technician at PT. Amerindo Furniture

1997 to 1998

Working as Technician of pipe machine at PT. Supra Teratai Metal

TRAINER & TEACHING EXPERIENCE

January 20014-present

Trainer of “Quality Management System (ISO 9001:2008)” under supervision PT. Activindo System Informatika (Freelance Trainer)

January 2014-present.

Mechanical Engineering Lecturer at Muhammadiyah Tangerang University (Part-Time)

February 2013-Present

Trainer of GD&T Base on ISO & ASME Standard, under supervision NevilleClarke Indonesia (Freelance Trainer)

GD&T (ISO 8015, ISO 128, ISO 14660-1, ISO 1101) for Schenaider Electric Cikarang-Indonesia (February 2012).

GD&T (ISO 8015, ISO 128, ISO 14660-1, ISO 1101) for Schenaider Electric Pulo Gadung-Indonesia (March 2013).

GD&T (ISO 8015, ISO 128, ISO 14660-1, ISO 1101) for Schenaider Electric Jakarta Selatan-Indonesia (June 2013).

Trainer of Mechanical Plumbing, Structure Analysis, under supervision NevilleClarke Indonesia (Freelance Trainer)

Planning in March 2014

February 2012-Present

Mechanical Engineering Lecturer (Executive Program Kuliah Sabtu-Minggu) at Mercu Buana University (Part-Time)

Pneumatic & Hydraulic 2011 (1 Semester)

Constructions Machinery (1 Semester)

Fluid Mechanic 2011-2013 (2 Semester)

Maintenance Engineering 2011-2012 (2 Semester)

Heat Transfer (3 Semester)

EXPERIENCE IN PROJECT HANDLING

2008 to 2011

Incorporated in a research team that focuses on the new process of developing nanocrytalline FeCr for fuel cell application, this research was supported by Advance Materials and Manufacturing Center (AMMC) Faculty of Mechanical and Manufacturing Engineering Universiti Tun Hussein Onn Malaysia (UTHM), National Nuclear Energy Agency (BATAN) Indonesia, and Advance Material Research Center (AMREC) SIRIM Berhad-Malaysia.

2012

In August 2012, I was assigned to handle the project that related to reduce the shrinkage value & Increase the efficiency on Fluorescent Lamp Manufacturing process in PT. Osram Indonesia using an integrated approach of TPM, RCM & Six Sigma programs. After 1 month, the result shows that the programs were succeeded to reduce the shrinkage value from 25% to below 10% & the efficiency was increased from 70% to 92%.

2012 to 2013

In October 2012 to January 2013, I was assigned to handle the project that related to improve the circular fluorescent lamp manufacturing process. The project focuses on the optimization of mercury dispensing system to release the mercury vapor inside the glass tube on the manufacturing process of circular fluorescent lamp. This project was supported by PT. Osram Indonesia and OSRAM SYLVANIA's worldwide research center. This project was successfully to release the mercury vapor into glass tube of circular fluorescent lamp less than 8 milligram and also improving the lamp performance and operational lifetime, safe working conditions and a sound, environment friendly approach due to the problem of mercury pollution.

RESEARCH AND TRAINING

Research

In 2008-2010, I was conducting research related to development of nanocrystalline Fe-Cr alloys by using powder metallurgy technique combined with ultrasonic technique and followed by hot compaction process. The research was continued to evaluate the effect of nanocrystalline structure of the alloy implanted with lanthanum and titanium dopant during exposure at high temperature application. This research was supported by Advance Materials  and Manufacturing Center (AMMC) Faculty of Mechanical and Manufacturing Engineering Universiti Tun Hussein Onn Malaysia (UTHM), National Nuclear Energy Agency (BATAN) Indonesia, and Advance Material Research Center (AMREC) SIRIM Berhad-Malaysia.

Course, Training and Conference

February 2013

Integrated Quality, Environmental and Safety Management System (ISO 9001, ISO 14000 and OHSAS 18001) (Certified)

December, 2009

Attending to International Symposium on Current Advancement and Research in Textile & Packaging Technology (Certified)

August, 2009

Course of Auto Form Tooling/Try out Solution Basic Training (Certified)

3-5, December, 2009

Attending to 7th ASEAN Microscope Conference (Present paper)

1-2, December, 2009

Attending to Malaysian Metallurgy Conference (Present paper)

December, 2008

Course of X-Ray Diffraction Application and Technique by Bruker Malaysia SDN BHD (Certified)

PERSONAL SKILLS

• Extensive knowledge of the detailed technical analysis by using Scanning Electron Microscope (SEM). “Surface analyses, chemical analysis and imaging on a variety of materials are performed using a Scanning Electron Microscope (SEM). The Scanning Electron Microscope is equipped with an Energy Dispersive Spectrometer (EDS). SEM/EDS provide chemical analysis of the field of view or spot analyses of minute particles. More than 90 elements can be detected with our low-atomic number detector using the SEM/EDS method. This micro-chemical analysis is also a non-destructive test”.
• Extensive knowledge of the detailed technical analysis by using X-Ray Diffraction Analysis (XRD). “X-ray powder diffraction (XRD) is one of the most powerful techniques for qualitative and quantitative analysis of crystalline compounds. The technique provides information that cannot be obtained any other way. The information obtained includes types and nature of crystalline phase’s present, structural make-up of phases, degree of crystallinity, and amount of amorphous content, micro strain & size and orientation of crystallites”.
• Proficient to applying Lean-Six Sigma analysis for Mechanical Engineering & Industrial applications
• Proficient to applying RCM, TPM and FMEA analysis for Mechanical Engineering & Industrial applications
• Proficient to applying ASME, API, ASTM and ISO standard for Mechanical engineering and Industrial applications
• Proficient to applying ISO 9001, ISO TS 16949, ISO 14000 & OHSAS 18001 for Management & Industrial applications
• Proficient to operate Lathe and Milling machine
• Familiarity with SOLIDWORKS and AUTO CAD
• Familiarity with Microsoft office 2003, 2007, 2010 and 2013

PERSONAL EXPERIENCE

• Chairman of the association of Mechanical Engineering students of Mercu Buana University (2003-2004)
• President of the Student Executive Board (BEM) of Mercu Buana University (2004-2005)
• Secretary General of Garuda Muda Institute (Non-governmental organizations) periods (2008-2012)
• Founder of Lingkar Mahasiswa Jakarta Raya & Banten (Student Executive Board Community regional Jakarta & Banten) in 2004.

PUBLICATION

Conference:

• M. Norazizul, Darwin Sebayang, Puji Untoro, Rosniza Hussin, Hendi Saryanto, “The Development of Fe-Cr Based Alloys Using Powder Metallurgy” published in ASEAN Metallurgy Conference-Malaysian, 2008.
• Pudji Untoro, Darwin Sebayang, and Hendi Saryanto, “Development of Fe80Cr20 based alloy by mechanical alloying process and combined with ultrasonic technique” Proceedings of 7th Asean Microscope Conference (AMC) 2009, BATAN, Bali, 3 - 5 December 2009.
• Hendi Saryanto, Darwin, Sebayang, Pudji, Untoro, Tjipto Sujitno, “Ion implantation process of Lanthanum and Titanium Dopants into a substrate of Fe80Cr20” Proceedings of the Malaysian Metallurgical Conference '09 (MMC'09), 2009 (Index by Google-Scholar).
• Darwin Sebayang, Hendi Saryanto and Pudji Untoro “Comparison of Oxidation Behaviour between Fe80Cr20 intermetallic based and Commercial Ferritic Steel,” in Syarahan Perdana, chapter 5, p.69, Penerbit UTHM (29 April 2010), ISBN 978-967- 5457-15-9.
• D. Sebayang,Pudji Untoro, Hendi Saryanto, D.S. Khaerudini,Rosniza Bt Hussin , “The Interval Cyclic Oxidation of Ferritic Steel Coated with Ti Based Ion Implantation” Paper publication at National Conference on Advanced Manufacturing & Material Engineering (NAMME) 2010, FKMP-UTHM; 25 – 26 May 2010.

Journal Publication:

• Darwin Sebayang, Deni S. Khaerudini, Hendi Saryanto, M.A. Othman, Mat Husin Saleh, D. Fredrick, Pudji Untoro, “Microstructure and Mechanical Properties of Nanocrystalline FeCr Alloy Prepared by Spark Plasma Sintering” Applied Mechanics and Materials Vol. 52 – 54 (2011), pp. 2197-2202 (Index by Google- Scholar and Scopus).
• Hendi Saryanto, Deni S Khaerudini, Pudji Untoro, M Husin Saleh, Darwin Sebayang “Determination of Nanocrystalline Fe80Cr20 Powder Based Alloys Using Williamson-Hall Method” Advanced Materials Research (Volumes 129 - 131), 2009, pp. 999-1003 (Index by Google-Scholar and Scopus).
• Darwin Sebayang, Ade Firdianto, Yanuandri Putrasari, Egi Agustian, Hendi Saryanto, Pudji Untoro, “Preparation of nanocrystalline Y-Alumina using Ultrasonic Technique” Advanced Materials Research (Volumes 129 - 131),2009, pp. 1034-1038 (Index by Google-Scholar and Scopus).
• D. Sebayang, Deni S. Khaerudini, Hendi Saryanto, Sulaiman Hasan, M.A. Othman, and P. Untoro, “Oxidation resistance of FeCr alloys treated by rare earth element ions implantation” Accepted paper in Current Themes in Engineering Science 2010 (CTES 2010), Published by American Institute of Physics (AIP).
• Darwin Sebayang, Deni S Khaerudini, Hendi Saryanto, M.A. Othman, T Sujitno, P Untoro “Effect of Nanocrystalline and Ti Implantation on the Oxidation Behaviour of Fe80Cr20 Alloy and Commercial Ferritic Steel” Advanced Materials and Computer Science (Volume 474-476), 2011, pp. 2134-2139 (Index by Google-Scholar and Scopus).
• Darwin Sebayang, Maizlinda Izwana, Asraf Othman, Dafit Feriyanto, Deni S. Khaerudini & Hendi Saryanto “New Process of Developing Nanocrytalline Fe-Cr for Fuel Cell Application” Prosiding Seminar Hasil Penyelidikan Sektor Pengajian Tinggi 2013. ICT, Teknologi dan Kejuruteraan, 2013, pp. 665-677. (Index by Google-Scholar).
• Darwin Sebayang, Hendi Saryanto, Pudji Untoro, Deni S Khaerudini, “Effect of Depth Implantation of Lanthanum on The oxidation Fe80Cr20 alloys” Proceeding of the world congress on Engineering, Vol II, 2010, pp. 1378-1382 (Index by Google-Scholar and Scopus).    

Journal preparation:

• An Methods and Apparatus to Release Mercury Vapor from Ti3Hg into Circular Fluorescent lamp,  Author : Hendi Saryanto, ST, M. Eng, Dr. Ing. Pudji Untoro & Prof. Dr. Ing. Darwin Sebayang. (Still in Progress)
• An Integrated Approach to TPM & Six Sigma Development Programs to improve affectivity and productivity of Fluorescent Lamp Manufacturing Process, Author : Hendi Saryanto, ST, M. Eng, Dr. Ing. Pudji Untoro & Prof. Dr. Ing. Darwin Sebayang. (Still in Progress)

Book:

• Mechanical Element Design & Analysis in SolidWorks 2013 (Still in Progress)